Trustpilot and STV

Vaillant F42 Error Code: Causes and How to Fix It

Quick answer: The Vaillant F42 fault means there’s a problem with the coding resistor or gas group resistor, a small component that tells the boiler which model and gas type it is. A short circuit or break in that part, or its wiring, stops the boiler running. You can try one reset, but F42 is an engineer job.

F42 is one of the less common Vaillant codes, so if you’ve never seen it before, please don’t be alarmed. It sounds technical, but it’s usually a small part and a short job for a qualified engineer. Vaillant is a very popular brand in Edinburgh homes, and our team has tracked this one down before. If your Vaillant is more than around eight years old and out of warranty, it’s also worth asking whether a new boiler from our Edinburgh team makes better sense than another repair.

What does the Vaillant F42 error code mean?

F42 means a fault with the coding resistor or gas group resistor, caused by a short circuit or a break in the circuit.

The coding resistor tells the boiler how it’s set up, such as its model and the gas it runs on. If the boiler can’t read that resistor properly, it can’t be sure how to operate safely, so it stops.

What causes a Vaillant F42 fault?

The usual causes are a short circuit or interruption in the coding resistor, its wiring in the cable harness, or the gas group resistor.

  • Faulty resistor: the component has failed
  • Wiring harness problem: the cable carrying the signal is damaged, loose or has shorted
  • A connection issue: a plug isn’t seated properly, for example after work on the boiler

If F42 appeared soon after a repair or service, tell your engineer.

How do you fix a Vaillant F42 error?

You can’t fix F42 at home. Try one reset, and if it returns, book a Gas Safe engineer.

  1. Switch the boiler off at the isolator for a minute, then switch it back on.
  2. Press reset once.
  3. If F42 comes back, leave the boiler off.
  4. Book a Gas Safe engineer and mention any recent repair work.

Please don’t open the casing or try to bypass the resistor. It’s a configuration part, and getting it wrong can affect how the boiler runs.

Does a recent repair cause F42?

It can, if a connection was disturbed or a part was changed. A resistor plug that isn’t seated correctly can show as a fault. It’s worth telling whoever you call about any work done on the boiler in the days before the code appeared.

That detail often saves an engineer time on the diagnosis.

Does servicing prevent F42?

Servicing helps, because an engineer checks connections and wiring, and a boiler service is a good opportunity to spot a damaged cable early. It also means any parts work is done properly and recorded.

When should you call an engineer for a Vaillant F42?

Call a Gas Safe engineer as soon as F42 appears and doesn’t clear after one reset. It won’t be something a restart fixes, and the boiler can’t safely run until it’s sorted.

F42 has a close relative in F70, which often appears straight after a new circuit board or display has been fitted. If that’s what your boiler shows, have a read of our Vaillant F70 error code guide.

Vaillant boiler repairs across Edinburgh and Scotland

The Edinburgh Boiler Company repairs, services and replaces boilers across Edinburgh and Scotland. Our Gas Safe engineers cover every Edinburgh postcode from EH1 to EH55, plus Balerno, Bonnyrigg, Dalkeith, Linlithgow, Musselburgh, Penicuik and South Queensferry. We’re Which? Trusted Traders, and our team works on Vaillant boilers every week. If your Vaillant is showing F42, book a Vaillant engineer for a diagnosis and we’ll get to the bottom of it.

Frequently asked questions about the Vaillant F42 error

Is a Vaillant F42 fault dangerous?

The lockout is the boiler protecting itself, so it’s the safe outcome. If you ever smell gas, turn the boiler off at the isolator, open windows and call the National Gas Emergency number on 0800 111 999.

Can I reset a Vaillant with an F42 code?

You can try one restart, but it’s unlikely to clear it, because the problem is a component or its wiring, not a temporary glitch.

Is F42 serious?

Not usually. It’s often a small resistor or a wiring connection, though an engineer needs to confirm that. Our guide to Vaillant boiler error codes lists the more common codes for comparison.

Is it worth repairing an older Vaillant that keeps showing faults?

If it’s over eight years old and out of warranty, a run of electronic and wiring faults often means more to come. A Gas Safe engineer can give you a repair-or-replace comparison, and you can request a free quote at the same visit.

Get Your Free Fixed Price Quote