Quick answer: F93 on a Vaillant usually tells you the mix of gas and air burning in the boiler has drifted outside the range it’s allowed to work in. It can come from the wrong gas setup, flue gases being drawn back in, or a blocked internal measuring point. Reset it once by the manual, then book a Gas Safe engineer, because it can’t be checked without specialist equipment.
I know a code about combustion sounds frightening. In practice, the boiler is doing what it should by stopping, and an engineer can narrow down the cause with the right equipment.
What does F93 mean on a Vaillant boiler?
A gas boiler needs the right balance of gas and air to burn cleanly. F93 means the boiler has judged that balance to be outside its permitted range. It’s a combustion fault, which is a different thing from a sensor fault or a low pressure fault.
Secondary sources list it on the Vaillant Plus combi, and some also show it on the Plus system and the Combi Store. If your boiler is a different model, the code may mean something else, so check your manual before assuming.
What causes a Vaillant F93 fault?
The likely causes sit inside the boiler or in the flue, which is why none of them are for homeowners to test.
| Cause | Tell-tale sign | Usual fix | Who fixes it |
|---|---|---|---|
| Wrong gas restrictor fitted | Fault appears after installation or conversion work | Correct restrictor fitted and combustion checked | Gas Safe engineer only |
| Flue gas recirculation | Boiler runs for a bit, then stops with F93 | Flue and air supply inspected and corrected | Gas Safe engineer only |
| Wrong gas family set | Code shows after a board change or setup work | Gas type settings corrected and checked | Gas Safe engineer only |
| Blocked internal pressure measuring point | Code returns after every reset | Measuring point cleared by the engineer | Gas Safe engineer only |
| Gas family check ended early | Follows an interrupted start-up or setup | Check repeated properly | Gas Safe engineer only |
How do you fix a Vaillant F93? Can I reset it?
There’s one thing you can do, and it’s a single reset.
- Note down the code and what the boiler was doing when it appeared.
- Follow the reset instructions in your boiler’s manual.
- If it fires up and stays running, still book an engineer to check it, since the fault may come back.
- If F93 returns, leave the boiler off and call us.
A second or third reset won’t help and may keep the boiler running when it shouldn’t be. To judge combustion properly, an engineer uses a combustion analyser, which measures what is coming out of the flue. There’s no safe home version of that test, and you shouldn’t touch the flue, the gas valve or anything inside the casing.
Whatever your manual says, if you’re unsure, play it safe and call a Gas Safe registered engineer.
Is a Vaillant F93 fault dangerous?
It deserves respect. Poor combustion is one of the ways a boiler can produce carbon monoxide, the colourless, odourless gas that makes people ill, and I can’t tell from a code alone whether that is happening. So please have a working carbon monoxide alarm, take any alarm seriously, and don’t keep using a boiler that keeps showing F93. If your alarm sounds or you smell gas, get everyone outside and call the National Gas Emergency Service on 0800 111 999.
Should I repair or replace my Vaillant boiler?
If the fix is a setup correction or a cleared measuring point, repairing is clearly right. If the boiler is over 8 years old and out of warranty and the engineer finds a bigger combustion problem, get a price for replacement before agreeing to a big repair. You can ask for a quote on a new boiler from our Edinburgh team at the same visit.
Does a service prevent F93?
It can help. A boiler service includes checking the flue and the way the boiler burns, so problems with air and gas supply get spotted early.
Vaillant boiler repairs across Edinburgh and Scotland
Here at The Edinburgh Boiler Company, we repair, service and replace boilers across Edinburgh and Scotland. Our engineers are Gas Safe registered, and we hold Which? Trusted Trader status. We work in postcodes EH1 to EH55 and further out in places like Broxburn, South Queensferry, Balerno, Galashiels and Kelso. To get started, book a Vaillant repair. You’ll find more codes in our Vaillant fault code hub.
Frequently asked questions about the Vaillant F93 fault
What’s the difference between F93 and F92?
F92 is a mismatch between the coding resistor and the gas group entered, while F93 is about how well the gas and air are actually burning. You can compare it with our Vaillant F92 guide.
Is F93 the same as a flame loss fault?
No. Codes such as Vaillant F29 are about the flame going out, whereas F93 is about the quality of the burn.
Can I keep using my boiler with F93?
I wouldn’t. If it runs after a reset, treat it as borrowed time and get it checked, because poor combustion can be unsafe even when the heating works.
Why does F93 need a Gas Safe engineer?
Only a registered engineer can legally work on gas boilers, and only an engineer has the analyser needed to see what is going on in the flue.
Related codes: Vaillant F92 and Vaillant F10.