Heat Pump Installation & Replacement in Stirling
Whether you need a brand new heat pump installation or you’re replacing a tired oil boiler that’s struggling to keep up, our MCS-accredited engineers install and replace air source heat pumps across Stirling and the wider Stirlingshire area. Stirling sits around 37 miles north-west of Edinburgh at the foot of the Ochils and the Trossachs, so we see everything from traditional sandstone tenements near the Top of the Town and Bridge of Allan to newer estates in Raploch, Riverside and Cambusbarron, plus more exposed farmhouses and cottages out towards Doune, Callander and Dunblane.
That mix matters for a heat pump replacement: a compact system sized for a Raploch flat is a different job to one sized for a detached cottage catching the wind off the Trossachs. We size every new heat pump installation to the property and the local weather, not a generic spec sheet.
£7,500 off heat pump installations
Heat Pump Surveys, New Installations & Replacements in Stirling
Stirling covers everything from traditional stone properties around the Top of the Town and Bridge of Allan to newer estates in Raploch, Riverside, Cambusbarron and Torbrex, plus village and rural homes out towards Bannockburn, Cowie, Fallin, St Ninians, Causewayhead, Dunblane, Doune and Callander. Every one of those needs a different heat pump replacement, so we start with a detailed home survey to size and configure the system correctly rather than fitting a one-size-fits-all unit.
A typical new heat pump installation or replacement in Stirling includes:
- Room-by-room heat loss calculations to determine the right system output for your home.
- Checks on insulation, windows and existing radiators to confirm they’ll work with a lower-temperature heat pump system.
- Advice on upgrades such as larger radiators or underfloor heating where an older Stirling property needs it.
- Guidance on the Home Energy Scotland grant and interest-free loan, which cover the Stirling Council area the same as the rest of the Forth Valley.
- Professional installation carried out by our own accredited engineers, not a subcontractor.
Stirling’s position between the Ochils and the Trossachs means cool summers, cold winters and more rainfall and wind than you’ll find in Edinburgh, especially on higher ground towards Callander and Aberfoyle. We size and commission every heat pump replacement with that in mind, so it copes with a hard frost in Dunblane just as well as a sheltered semi in Bannockburn.
Why Stirling Homes Are Switching to Air Source Heat Pumps
Replacing an old gas or oil boiler with an air source heat pump is a bigger decision in Stirling than in a city with mains gas on every street — a lot of the villages around Bannockburn, Cowie, Fallin and out towards Doune and Callander are off the gas grid, which is exactly where a heat pump replacement tends to pay back fastest.
- Lower running costs than oil or LPG, which many rural Stirlingshire properties currently rely on.
- A Home Energy Scotland grant of up to £7,500 towards a new heat pump installation, rising to £9,000 for rural and off-grid homes around Stirling, plus an interest-free loan for the balance.
- Consistent heat through a Stirling winter, including the higher ground and stronger winds around the Trossachs and Ochils.
- A long service life with fewer moving parts than a boiler, and no annual gas safety inspection to arrange.
- A better EPC rating, which matters for the older sandstone terraces near the town centre as much as for a new build on the edge of town.
Whether you’re upgrading an ageing oil boiler in a farmhouse near Gargunnock or fitting a heat pump into a new-build in Raploch, we size the system to the property rather than offering a single standard package.
Heat Pump Installation Costs & Timescales in Stirling
A full air source heat pump installation in Scotland — including the unit, a new hot water cylinder and commissioning — typically costs around £15,000 supply and fit, before any grant. Costs vary with property size:
- 1–2 bedroom flat or house (5–8kW): £8,000–£11,000
- 3–4 bedroom house (8–12kW): £11,000–£15,000
- 5+ bedroom or larger home (16kW+): £15,000–£18,000
Most Stirling homeowners don’t pay these figures in full. The Home Energy Scotland grant covers up to £7,500, rising to £9,000 for rural and off-grid properties — which applies to a good number of homes around Stirlingshire — with an interest-free loan available for the rest, so many of our customers pay nothing upfront.
For timescales, a home survey comes first so we can size the system correctly, and that’s usually booked within a few days of your enquiry. Installation itself typically takes 2 to 3 days on site for a straightforward replacement, longer if we’re also fitting larger radiators, underfloor heating or a new hot water cylinder. We’ll confirm a fixed completion date once the survey’s done, so you’re not left guessing.
See our full guide to heat pump costs for a further breakdown, or check who’s eligible for the Home Energy Scotland grant.
2000+ positive reviews
Highly Rated Heat Pump Installers In Stirling
Choosing a trusted installer is just as important as choosing the right technology. Homeowners across Scotland increasingly look for experienced, well‑reviewed companies to handle heat pump projects from survey through to aftercare.
Our engineers regularly work in Stirling and the surrounding areas, installing air source heat pumps, boilers and renewable systems in everything from compact city flats to larger village and countryside homes. Because we understand local property types and typical heating demands, we can design systems that integrate smoothly with your home and deliver strong performance.
We work with all the major heat pump manufacturers rather than pushing a single brand, including Vaillant aroTHERM plus units, the Octopus Cosy 6, and heat pump ranges from Ideal and Worcester Bosch, so we can recommend the right system and model for your property and budget.
Customers consistently value:
Clear guidance on suitability, grants and expected running costs.
Professional, tidy installations completed to agreed timescales.
Ongoing support to keep systems running efficiently.
4.7/5.0
★★★★★ Rated 4.6 out of 5
1400+ reviews
4.9/5.0
★★★★★ Rated 4.9 out of 5
400+ reviews
4.4/5.0
★★★★★ Rated 5 out of 5
Trusted Traders
Heat Pump Installation FAQs for Stirling Homeowners
An air source heat pump uses cutting-edge technology far more efficiently than a gas or oil boiler and other traditional heating systems. During operation, the unit takes ambient-temperature air from its surroundings, using a refrigerant to deliver heat throughout your home.
An air source heat pump uses electricity to compress refrigerant, thus increasing its temperature. Then, it condenses the refrigerant and slowly releases it as heat energy. The heat pump system sends the hot water through your underfloor heating system or radiators to keep your home nice and warm. Generally speaking, it’s the same technology as a refrigerator – just in reverse, so you get hot water and air instead of cold. It’s surprisingly efficient and makes an excellent long-term investment, especially for your heating bills.
Heat Pumps extract heat energy from an external source (air, water, ground or bedrock) and convert this free, natural, renewable energy into heating for your home. The principles involved are the same as in a domestic fridge: fridges absorb heat from inside the fridge and expel it into your kitchen; Heat Pumps absorb heat from the source and bring it into your home.
We install and are accredited to fit heat pumps from all the leading manufacturers, so Stirling homeowners aren’t limited to one option. This includes the Vaillant aroTHERM plus range, the Octopus Cosy 6, and heat pump models from Ideal and Worcester Bosch. During your free survey we’ll recommend the brand and model size that best suits your property, insulation levels and budget, rather than a single default option.
Essentially, an air source and a ground source heat pump utilise the same technology. However, there’s one major difference. Ground source pumps take heat from the ground through an underground pipe system, whereas air source heat pumps extract it from the surrounding air.
Choosing between a ground source and an air source heat pump involves a few different factors, including what you want for your home, the size of your property, and the project scope.
Don’t worry; we’ll make the installation process fast, affordable, and hassle-free. As a rule, air source heat pumps usually cost less than ground source units.
Yes it will. Thousands of these systems have been installed for many years in some of the coldest parts of the world.
Heat Pump technology was primarily developed in Sweden where the winters are long and harsh so heat pump systems can most definitely cope with British winters, which are relatively mild in comparison. The key to their success is the detailed design and specification process that ensures the system can produce enough energy for the application.
Both types of Heat Pump systems work in a similar method to refrigerators, except in reverse. Air Source Heat Pumps can extract heat from the air even when temperatures are as low at -15 degrees centigrade. The ground stays at a relatively constant temperature throughout the year so Ground Source Heat Pumps are capable of working all year round.
To provide cooling, Heat Pumps can be reversed, extracting heat from the home and releasing it outside. If you have an Air-to-Air Heat Pump installed, Heat Pump cooling systems work similarly to air conditioning units. In the UK the default setting on a reversible Heat Pump would be heating. Reversible heat pump systems are designed to work adequately in both modes, however the efficiency is typically slightly less than two separately optimised pumps. If you are looking for an Air-to-Water Heat Pump system it would be necessary to install a fan unit inside your home to circulate cold air within the building.
Only some models of heat pumps can act as both heating and cooling units, so if you have this requirement please do let us know in your enquiry so that the right solution can be designed and installed for you.
No, they hum like a large refrigerator. The units we supply have had many years of research and development to minimise any noise.
GSHPs are quieter than ASHPs. This is because they have no need for a fan and there is a reduced compressor power capacity requirement because heat extracted from the ground is generally warmer than that from the air.
ASHP noise is only generated when it is in operation and has been compared to anything from a modern washing machine on a spin cycle to a chest freezer. Any noise generated will largely be minimised by double glazing.
Many customers ask us whether they’re better off with a traditional boiler or an air source heat pump installation.
While the ultimate decision is up to you, here are the advantages of having a heat pump installed over a conventional boiler:
- Long life span and heating system warranty
- Strong heat output
- Lower heating bills
- Higher energy efficiency
- Fewer carbon emissions
- Renewable heat incentive scheme available
- Fast installation process
Another great benefit of choosing an air source heat pump is the minimal noise. Most are only about as loud as a large refrigerator. Ground source units are usually quieter than air source pumps, although they only make noise when they’re running. Furthermore, we can minimise any extra noise with our professional double glazing.
Heat Pump Installation Areas We Cover Around Stirling
As well as Stirling itself — including Bridge of Allan, Causewayhead, Raploch, Riverside, Cornton, St Ninians and Cambusbarron — our engineers install and replace heat pumps throughout Stirlingshire, including:
- Dunblane
- Bannockburn
- Fallin, Cowie and Plean
- Doune and Callander
- Aberfoyle and Gargunnock
- Kippen, Balfron and Fintry
- Killearn, Drymen and Buchlyvie
Not on the list? Get in touch — we cover the wider Forth Valley too.
The Leading Choice for a Heat Pump Installer in Stirling
- If you’re considering an air source heat pump for your home in Stirling, our team can guide you through the full process – from initial survey and system design to funding options and installation. We offer clear pricing, tailored plans and a focus on delivering the right solution for your property and lifestyle. Call 0131 510 8500 or request your free quote online today to get started with a trusted installer covering Stirling and the surrounding areas.
Call Us Directly
Want to speak to our office staff? Use the number below to reach our local office.
- Tel: 0131 510 8500
Email Us
Prefer to drop us a line? No problem. Send us a message and we'll get back to you as soon as we can.
